REINVENTING THE (HAND)WHEEL
Hand wheels are no longer bound to technocranes and high-end commercials. The Alpha Wheels bring precision framing to every set, even virtual ones.
Custom-built all-digital wireless for Ronin, Gravity and MOVI
The Alpha Link S.Bus and S.Bus XR bring a new level of wireless precision to gimbals of all types. This Alpha Link is designed specifically for Ronin, Gravity, and MōVI users to get the most precise, repeatable, fastest-response operating experience. All while simplifying setup.
DIRECT MOVI CONTROLLER INTEGRATION
Single cable. Plug and play. Zero downtime.
With the Movi Controller and Alpha Wheels, you can switch from Mimic to Joystick to Wheels in seconds. Unlike other wheels, there’s no rebinding or swapping out of transmitters. The Alpha Wheels are bus-powered off the Movi Controller’s batteries via a single cable.
PLUG AND PLAY MIMIC
Seamless, all-digital interface for the MIMIC
All-digital communication. No drifting. Ultra-low lag. Dedicated speed knobs. Repeatable moves. Plug and play. The Alpha Wheels + MIMIC Module provides the ultimate in precision operating experience.
PRE-VIS CINE DESIGNER INTEGRATION
First ever wheels to work in pre-vis software.
Use your wheels before you even get to set with industry-renowned Cine Designer. Together the Alpha Wheels and Cine Designer make the most robust visualization combination.
*Exact details of Cine Designer integration are still in development and subject to change.
Control for Every Remote Head/Every Gimbal/Every Camera
With an industry-first Open API, the Alpha Wheels are the first wheels that can work across the full spectrum of remote heads, gimbals, cameras, and more. If you can imagine a use for the wheels, with some simple software programming, they can almost certainly be used for them.
Communication protocols in development: Serial via USB, Serial via Lemo, CAN BUS, Raw Encoder Data, and stepper motor compatible Step and Direction signal.
Q: How do I set it up to work with a Movi Controller?
A: See the manual for detailed instructions. You will only need the Movi Controller Com Cable. It provides power and data from the controller to the Alpha Wheels. We also currently include a Movi Controller mounting bracket for free with the Movi Controller Cable.
Q: How do I set it up to work with Cine Designer?
A: See the manual for detailed instructions. For the Alpha Wheels, you will only need a micro USB cable. It works off any bus powered USB port. You will also need (and we do not provide) a licensed version of Cinema4D and Cine Designer. A future version of Cine Designer will be released with support for the Alpha Wheels.
Q: How do I set it up to work with a Movi Spektrum Controller?
A: See the manual for detailed instructions. You will need the Spektrum Com Cable and you will also need a 2-pin Lemo 0B power supply. This can be any cable that provides 2-pin lemo power 7-30v, Arri polarity: pin 1 as ground.
Q: How do I set it up to work with a Ronin?
A: See the manual for detailed instructions. Currently, we support Ronin via a Futaba Controller. You will need the Futaba Com Cable, a Futaba Controller (like the Futaba 14SG) and you will also need a 2-pin Lemo 0B power supply. This can be any cable that provides 2-pin lemo power 7-30v, Arri polarity: pin 1 as ground.
Dimensions: 43.1mm (H) x 42.9mm (W) x 75mm (L)
Tie Downs: 3 x 3/8-16 Holes and 2 x 1/4-20 Holes
Weight: 6 lbs unit only w/ aluminum wheels, 9.5 lbs w/ aluminum wheels and base, 16 lbs w/ brass wheels and base
Encoders: High-Resolution, 12-bit, Capacitive Encoders
7-30V Unregulated via 2-Pin Lemo (Arri Polarity)
5V Regulated via IO Port
5V Regulated via Micro USB
Supported Outputs via Interfaces
Freefly MōVI Pro via Alpha Link MIMIC, Alpha Link S.Bus (XR) and MōVI Controller
Freefly MOVI M15/M10/M5 via MōVI Controller, Alpha Link S.Bus (XR) and compatible Spektrum and Futaba Controllers
Cine Designer via Micro USB
DJI Ronin via Alpha Link S.Bus (XR) and compatible Futaba Controllers
Tilta Gravity via Alpha Link S.Bus (XR) and compatible Futaba Controllers
Additional Open API Outputs
Serial via USB*
Serial via IO Port*
CAN Bus via EXT Port**